A Trip to the Beach

Artisan Donuts at Dough Hut

This past week my family, Lucas, and I went to the beach for mini-vacation at my uncle’s beach house in Long Beach, Long Island. As Charles Dickens’ once wrote, “It was the best of [weeks], it was the worst of [weeks]”. My uncle’s house doesn’t have air conditioning, which, in conjunction with the recent heat wave, was unbearable. Luckily, we also had the ocean. It’s a toss up.

While there, Lucas and I tried a new doughnut shop, Dough Hut, and sampled every single one of their flavors. My personal favorites included Maple Bacon and Vanilla Crumb, while Lucas liked Pistachio and Jelly.

DIY Bottle Cap Mural

Long Beach was hit pretty hard by Hurricane Sandy, so it’s nice seeing it get back on its feet. There’s more art around, including this cute (and resourceful) mural on a low dividing wall. It’s made of thousands of bright bottle caps.

Essie Bikini So Teeny

I also got my traditional beach mani/pedi while there in Essie’s Bikini So Teeny. (Pictured with my own personal almost-matching teeny bikini).

Rockaway Taco

We also made a stop at family-favorite Rockaway Taco to get their delicious fish tacos. They are simply divine. I highly recommend visiting (except not while I’m there, because that place is crowded enough as it is, thanksverymuch).

Rockaway Taco Fish Taco

How are you beating the heat?




Happiness is…

hydrangeas spring flowers

It’s been a relaxing few weeks for me, and I’m loving soaking in all of the goodness that summer has to offer. Hydrangeas are blooming all over my neighborhood and putting me in such a good mood. I think they’re such gorgeous flowers.

grilled vegetables

We’ve been having a couple cookouts, and while I love burgers and ribs, I can’t get enough of grilled veggies (these ones were prepared by Lucas’ mom) – they’re so bright and delicious.

orange creamsicle cocktail

With my birthday approaching, I’ve been test driving some potential cocktails to serve. This one is super simple and tastes exactly like an orange creamsicle. Just mix one part whipped vodka (or vanilla – but I love exotic flavors) with two parts San Pellegrino aranciata. It’s light, sweet, and nostalgically delicious.

What’re you excited for this summer?



DIY Chevron Hamptons Inspired Dress

DIY Chevron Dress Nautical

When summer comes around, I can’t help but be drawn towards preppy staples like nautical stripes, navy blue, and kelly green – all I can dream about is lounging on the beach or on the back porch in classic-looking clothing. When I saw the “High Hamptons” collection in Joann Fabrics, I knew that I had to make something with it. I’ve also seen a lot of chevron patterns and textiles all over Pinterest recently, which inspired me to take the stripe fabric I found and play around with it a little.

Chevron pattern inspiration

The most important part about making your own chevron clothing is making sure that the stripes line up. That’s really the key to making your dress (or skirt) look expensive. Overall, it’s it’s pretty simple, you just need to be extra careful when cutting and sewing your pieces.

DIY Chevron Dress Nautical

Here are the materials you’ll need:

  • 1-2 yds striped, knit fabric – I ended up doing chevrons only on the front panels, so I needed a bit less. The amount you need will depend on the size you’re making and the difficulty of matching the stripes. It’s usually better to err on the cautious side. My fabric is a lurex blue and green stripe poly blend from the High Hamptons line at Joann Fabrics.
  • 1 yd matching knit fabric (Optional) – I chose a kelly green knit fabric to complement the front of the dress. If you instead want to do chevrons on the side panels as well, add this amount of fabric to the striped fabric requirement.
  • Matching thread – I chose to use navy thread to match the darker of the stripes
  • An old tank top – Grab an old tank top, skirt or knit dress that you like the fit of. This will provide a loose template for a pattern.
  • Large sheets of paper – This can be any type of paper – we need it to create a paper pattern to help us cut out the pieces. I ended up using a couple sheets of newspaper.

DIY Chevron Dress Pattern Illustration

How to make it:

  1. Step one: Create a pattern
    Spread your tank top or dress down on your paper. Sketch out a loose outline of the clothing. Each half of your body (top/bottom) will be covered by eight pieces. After tracing out a loose copy of your tank top, cut it in half down the middle (where the two “1” pieces separate). Draw and cut a line where you want the front panels to separate from the side panels (i.e. cut your pattern into “1” and “2” pieces). Cut the pieces apart. Decide where you want the waistline to fall, and cut the bottom of the pieces off there. Now, sketch out a pattern from the skirt. Again, cut the piece in half and then into front and side panels (cut 3 from 4). Made sure that the top and bottom panels meet each other at the right place and are the same width there.
  2. Step two: Cut out the fabric
    This is one of the most important steps – cutting out the fabric and matching stripes. For each pattern piece you’ve made, you’re going to cut out four copies. I started with the “1” pattern piece. Position your pattern on the fabric so that the stripes are going at the angle you want them to – I did a pretty steep ~45 degree angle, but it’s up to you. Cut out that pattern piece. Now, here’s the trick. Place that piece of fabric back on top of your striped fabric, and line it up so that it intersects with the stripes next to it when they are also at the same (but reversed) angle. A good way to check this is to look at how wide the stripes are at a given point, and make sure their widths match up. They should form a perfect chevron together. When you’ve finished matching up the stripes, place the paper pattern down on that section of fabric, so that cut fabric and the paper form a mock-up of the whole front “1” panels. Pin that pattern down, and cut it out. You should now have matched, cut “1” panels. Continue this for the two back “1” panels. For the “3” panels, using the same method, match the waist stripes from the “1” panels into chevrons, and then match the center chevrons again. Do it again for the back “3” panels. The end result of all the matching and cutting should look like the right image in the above illustration. For my version, cut “2” and “4” panels out of your complementary fabric. If you also want to make chevrons there, follow the above method to match stripes.
  3. Step three: Sew, sew, sew!
    Now’s the time to sew all the pieces together! It’s really important to match up the stripes, so carefully pin each piece together, matching stripes as you go. Sew all the pieces together following the diagram above. You should probably use a “stretch” needle to sew the knitted fabric. I also used a zigzag stitch, because I find that straight stitches tend to be less forgiving on stretch fabric. Hem the bottom, neckline, and armholes of the dress, making sure the seams hit the same place on the dress (the stripes will make it painfully obvious if the neckline isn’t hemmed evenly).

DIY Chevron Dress Nautical

There, you’re done! Wear it with classic wayfarer sunglasses and cute sandals on a sunny summer outing or with a cardigan for casual summer work attire. What I really love about this dress is that it’s so easy to wear but still so cute (also, let’s be real, the chevron stripes are visually slimming and create a pseudo hourglass shape). Enjoy!

DIY Chevron Dress Nautical